OPT.H2.SENS.K3 / OPT.H2.SENS.K4
OPT.H2.SENS.2 is a security system that constantly detects the amount of Hydrogen present in the GC’s oven and blocks the Hydrogen generation if it detects an amount greater than the safety threshold.
The OPT.H2.SENS.RCV controller reads the percentage of Hydrogen measured by the sensor OPT.H2.SENS.2 and, if the value exceeds the threshold alarm, the Controller deactivates the solenoid valve in the OPT.H2.SENS.VB.V2 block. The alarm can be signaled to a PC and to a remote device.
OPT.H2.SENS.2 is engineered to work in standalone mode connected by RS-485 network to a Hydrogen Generator. The sensor can be connected directly with the MicroPROGEL Hydrogen Generators.
When the hydrogen concentration detected exceeds a threshold of safety, the Hydrogen Generator automatically stops the production and audible and visual alarms will be reported.
- Continuous monitoring of the GC’s oven
- Acoustic and optical alarms
- Potential explosion risks eliminated
- Compatible with all GCs
- Simple installation
- Simple calibration
- Low operating costs
- GC’s oven
- All environments where Hydrogen is used
|Hydrogen Sensitivity Range||12 VDC +/- 5%|
|Accuracy||0.8 A use with OPT.H2.SENS.VB.V2|
|Typical Response Time||Open collector
|Power Supply Voltage||5-35°C (41-95°F)|
|Communication port||80% at 25°C (77°F)|
|Hydrogen Sensitivity Range||0.01% to 1.00% by hydrogen volume (25% LEL, Lower Explosion Limit)|
|Accuracy||± (5.0% of F.S. + 1000ppm)|
|Typical Response Time||less than 20 sec|
|Power Supply Voltage||From 9VDC to 28VDC|
|Calibration Interval||1 year (suggested 180 days)|
|Hydrogen Sensor Technology||Dioxide semiconductor|
|Product Life Expectancy||10 years|
|Body temperature range||-10 °C to 40 °C|
|Hydrogen Inlet pressure||1 to 9 bar|
|Inert Inlet pressure||1 to 10 bar|
|Pressure regulator||1 to 9 bar|
Need more information about this product?
Please contact us at firstname.lastname@example.org or fill the form.