H2 Generator Desk

ND series

The ND series generators use an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen.
The exclusive, electronically-controlled gas/liquid separator, automatic checking for internal leaks whenever starting the unit, and constant control of operating parameters, guarantee maximum safety.
Up to 20 units can be connected in parallel. The touch-screen LCD interface provides simple and user-friendly management of all functions on the unit.

Hydrogen is produced from distilled water using a polymeric membrane (PEM). No acid or alkaline solutions are used.
The ND series features a desiccant cartridge that needs to be replaced or refilled when saturated.

Product features

  • Available Flow-rates: up to 500 cc/min
  • Outlet pressure: up to 10 bars
  • Hydrogen purity: >99.9995%
  • Drying system: Refillable molecular sieve column
  • Internal water tank: 2.3 litres, with electronic level control and “Autorefill” from external tank (optional)
  • Dimensions: 30x43x42(H)
  • Weight: 14.5 kg
  • Certification: CE, ISO9001

Main applications

  • ICP-MS collision gas
  • Flame ionization detector feed gas (FID)
  • Refilling metal hydride tanks for use with fuel cells

Technical specifications

Model: ND.H2.120 ND.H2.180 ND.H2.260 ND.H2.400 ND.H2.500
General data
Electrolytic cell PEM technology
Drying system External column dryer
H2 purity > 99.9995% ¹
Outlet pressure 7 bars (100 psi) / 10 bars (145 psi) (optional)
H2 flow-rate cc/min (Max) 120 180 260 400 500
Dimensions 30x43x42(H) cm
Net weight (no water in tank) 14.5 kg
RS232 X X X X X
RS485/USB Optional X X X
LAN Optional
Software functions
Parallel mode Not available
Automatic tank refill X X X X X
Quality Deionized, ASTM II, <0.1uS
Supply pressure (Min) 0.2 bars (1.4 psi)
Supply pressure (Max) 1 bar (14 psi)
Supply flow-rate (Min, Max) 0.2 l/min, 1.5 l/min
Internal tank capacity 2.3 l
Electrical data
Type of connection IEC 320-C13
Power supply voltage 100-240 Vac 50/60 Hz
Installed power (Max) 280W
Fuse rating (5×20 mm) 4A 250VAC
Hydrogen outlet 1/8” compression fitting
Water Quick release push-in fitting

¹ Referred to O2, dew point < -55°C

Information request

Need more information about this product?
Please contact us at info@microprogel.it or fill the form.